• Home
  • News
  • Blog
  • Why industrial machinery and heavy equipment manufacturers should look into extending PLM to Manufacturing

Why industrial machinery and heavy equipment manufacturers should look into extending PLM to Manufacturing

During the past decades, customer demand has grown to become more specific than ever before. It’s all about catering to different needs and tastes. Just think about the shelves at your local supermarket – I bet there are plenty more products to choose from than, say, 20 years ago. 

The same can be seen in business-to-business as companies are now looking for fit-for-purpose solutions that do exactly what they need them to do efficiently without bells and whistles they don’t need. But the thing is that for some, those bells and whistles are exactly what they need, so manufacturers have to be able to meet a multitude of different needs. And that’s not easy.

assembly data process 640x360 tcm27 25480

Back in 2012, John Deere built, on average, only 1,5 machines with the same configuration while they delivered in total more than 7 800 unique variants. That’s a huge challenge to design and manage a product portfolio to support such a scenario. For many manufacturers, the solution is to invest in the development of modular and configurable products that can be quickly configured to order based on customer’s needs. To answer even more specific needs manufacturers quite often provide engineer to order services in order to deliver a customized solution that fulfills the exact customer needs. Configure-to-order (CTO) and engineer-to-order (ETO) are great ways to manage product complexity, yet efficiently deliver product specification to manufacturing.

 How about manufacturing?

While CTO and ETO approach help companies to relieve product management complexity many forget about the implications on the shop floor. It’s well known that variation on the shop floor leads to inefficient processes. So how to overcome this challenge? Well, the scout has known this for a long time – the answer is to “be prepared”. In the world of manufacturing we can look into the preparedness from three angles: Enabling manufacturing engineers to access all relevant information as early as possible, providing means for visual process planning, and finally deliver intelligent work instructions that are easy to follow to the shop floor. Let’s look at each of these aspects more in detail.

Closed-loop change between engineering and manufacturing

Traditionally product engineering has been rather disconnected from manufacturing and the information passed on consists mainly of drawings and bills-of-materials or BOMs. Usually, there are some design reviews held based on project gate models where manufacturing people get to have their say yet this approach doesn’t really enable thorough analysis from the manufacturing perspective. Hence quite often the proper manufacturing process planning can only begin at the physical prototype phase.

When manufacturing engineers are given access to the same data and information as the product designers via a platform like Teamcenter PLM they become part of the process in a much earlier stage enabling them to provide earlier feedback which ultimately results in cost savings as required product changes are acknowledged and implemented before any physical prototypes are built. Furthermore, the Teamcenter PLM platform provides a manufacturing process planner application that helps manufacturing engineers to begin process planning activities way before they usually have. 

Visual process planning

Manufacturing process plans are traditionally described using spreadsheets which are sometimes accompanied with e.g. flow charts for easier understanding. The issue with this is that it’s totally disconnected from product engineering, doesn’t really provide any visual aid, and managing changes is time-consuming and error-prone. In addition, manufacturing engineers have to wait until product engineering releases bill-of-materials and drawings to begin this work.

Enabling manufacturing engineers to plan manufacturing activities concurrently with product engineering on the Teamcenter platform provides them access to all required design data including 3D models, create ERP/MES-ready material routings, and balance the activities and tasks e.g. against a production line to meet cycle time requirements. The possibility to visualize the product build step-by-step in 3D, perform visual time analysis, and visualize the process flows using PERT and Gantt charts are the keys to get the job done efficiently. In addition, the manufacturing process planner provides the platform to author and publish work instructions which are not something most are used to in the past.

Intelligent shop floor instructions

Typically work instructions on the shop floor consist of traditional paper drawings and bills-of-materials. Sometimes even additional instruction documents may be at hand. Some may have even digitized these and enabled access to pdf’s and such. One can’t stop wondering that why do we still use 2D drawings with projections etc. while the majority of the engineering is done in 3D. Isn’t the 3D much more visual way to communicate needed features, especially for younger generations now rapidly taking over many workplaces?

Intelligent shop floor instructions provide workers intuitive access to needed information on-demand basis. Also based on process steps the information covers only what is needed exactly then, nothing more, nothing less. Visually rich instructions with 3D models, a list of consumed parts and needed tools, even animation or video to guide them through the task help workers to perform their job right from the start and ease up the learning curve. Furthermore, the Teamcenter platform enables data collection of quality measurements and even serial numbers while providing means for reporting back any deviations or problems complemented with any attachments like photographs or documents. This is where the loop from manufacturing back to product engineering is closed.

Putting it all together

What does all of this mean in the end? Well, enhancing cross-departmental collaboration, making manufacturing process planning more efficient, and providing easy-to-follow instructions on the shop floor all aim toward the same goals – to be able to deliver products to the customers faster and with better quality.

Integrated engineering and manufacturing is critical to addressing complexity (source: Siemens collateral)

 plm manufacturing collaboration

***

if you would like to find out more about extending Manufacturing into PLM, get in touch with me!

Mikko Vehviläinen, Director, Manufacturing Business Solutions, +358 44 519 2106, This email address is being protected from spambots. You need JavaScript enabled to view it.

 

Give us a few minutes! We would love to tell you more about our solutions.

Send us your details and we will contact you. Thanks!

Invalid Input
Invalid Input
Invalid Input
Invalid Input
Invalid Input

Selection of Customer CASES

  • SeAMK
  • Alpha Aqua
  • Laitila Tooling
  • Seco Tools
  • Polar Electro
  • Logset Oy
  • Bronto Skylift
  • Jucat
  • Bronto Skylift
  • TAMK
  • PBH Teknik - CNC machining for the high technology industry
  • TAMK
  • Harju Elekter Groups
  • Turku AMK
  • Streamlined work for Tooltec Trestad
  • Mekverken Tool saves time and money
  • University of Oulu
  • Miror – Creating emotional engagement
  • Jucat
  • Bronto Skylift
  • Hesplan Oy
  • TOMRA - Rethink, Remain & Resource
  • Konecranes
  • SeAMK
  • Suhmuran Metalli
  • Toijala Works